European Type

WL450C

WL450C automatic sewage lifting device, 450 W, 125 L/min maximum flow and 8 m maximum head, built for 220–240V / 50Hz supply.

Power
450 W
Max head
8 m
Max flow
125 L/min

WL450A shares the published flow and head of this model; the catalog difference is the float setting, 75 / 35 mm instead of 80 / 30 mm.

WL450C European Type sewage lifting device

Product image shown for the European Type line; single-model photography is being matched to the catalog pages.

02Technical data

Parameter table

Fields still being verified against the catalog are marked, not estimated.

Voltage
220–240V
Frequency
50Hz
Power input (P1)
450 W
Motor speed
2850 RPM
Insulation class
Class F
Noise level
< 45 dB
Protection class
IP55
Maximum flow
125 L/min
Maximum head
8 m
Start level
80 mm
Stop level
30 mm
Inlet / outlet size
To be confirmed
Source: 2026 English catalog, p. 5
03Packing

Packing and container loading

The catalog prints carton quantity, weights and container loading for this model on 2026 English catalog, p. 5. Those figures are released after the page-to-model mapping is signed off, and are sent with the quotation in the meantime.

Units per carton

To be confirmed

Gross weight

To be confirmed

Net weight

To be confirmed

Carton size

To be confirmed
20GP loadingTo be confirmed
40GP loadingTo be confirmed
40HQ loadingTo be confirmed
04Structure

Construction points

  1. 01

    Separation of water and electricity chambers

  2. 02

    Anti-tangle impeller and cutting geometry

  3. 03

    Stainless steel motor shaft and impeller assembly

  4. 04

    Automatic float level control with factory start/stop setting

05Installation

Minimum conditions

Installation drawing pending
  • Level base, inlet below the lowest fixture outlet.
  • Full-bore vent to atmosphere.
  • Accessible non-return valve on the discharge line.

Detailed drawing and clearance figures are released with the technical file.

06Fit

Where it fits, and where it does not

Suited to

  • Basement toilets, showers and utility sinks
  • Kitchen and laundry discharge where solids may be present
  • Renovation projects without gravity drainage to the sewer

Check before selection

Discharge line length, vertical lift and solids content must be checked against the published flow and head curve before selection.

07Related

Adjacent models

All models

08 / Inquiry

Ask about WL450C

The model is already attached to this form. Add the lift height, discharge route and target market to receive a quotation with packing data.

EmailTo be confirmed
WhatsAppTo be confirmed
WL450C

Fields marked * are required. See the privacy policy for how inquiry data is used.